KILN

Home / Human factors

Human factors for combination products

Kiln supplies materials and surrogates for human factors studies, including surrogate solutions and filled or assembled test units. Human factors partners on retainer conduct the studies and contract directly with you.

Materials for studies you run with a partner

A combination product has to work in the hands of the people who will use it: patients, caregivers and healthcare professionals, with the instructions and packaging they will actually receive.

Human factors studies need test units that represent the product: the right container, the right fill, and, where the study requires it, an assembled device. Kiln supplies those materials and surrogates, including surrogate solutions and filled or assembled test units.

Kiln does not conduct formative or summative human factors studies. For the study work itself, we have human factors partners on retainer. They run the studies and contract directly with you.

  1. Agree the unitsWhat the study needs: liquids, filled containers, assembled devices
  2. Make the materialsSurrogate solutions, filling and assembly at Kiln
  3. Connect a partnerA partner on retainer runs the study and contracts with you
  4. DeliverUnits go to you or to the partner, ready for the study
How Kiln supports a human factors study without conducting it.

What we supply

Materials and surrogates for the study, and an introduction to a partner when you need the study itself run.

Materials and surrogates

What the study is run on.

Surrogate solutions

Placebo and surrogate solutions matched to your formulation's key properties, such as viscosity and density, so study units can be built without using your drug product. See filling and surrogate solutions.

  • Surrogate solutions
  • Viscosity matching

Filled test units

Syringes, cartridges or vials filled at Kiln for use in a human factors study. Filled units are for testing and development only, not for human use.

  • Filled units
  • Not for human use

Assembled devices

Filled containers assembled into your device and, where needed, labeled, packed out or kitted for the study. See assembly and packaging.

  • Device assembly
  • Labeling and kitting

Study partners

The study work is not done by Kiln.

Partners on retainer

We have human factors partners on retainer who conduct formative and summative studies. If you need a study run, we can introduce you.

  • Partners on retainer
  • Formative and summative

Direct contract with you

The partner contracts directly with you for the study work. Kiln supplies the materials; the partner runs the study.

  • Direct contract

What Kiln does not do

Kiln does not conduct formative or summative human factors studies. Device characteristics that matter to use, such as cap removal force, activation force and injection time, can still be measured in our lab. See ISO 11608 testing.

  • No HF studies at Kiln
  • Lab testing available

How we work

Work is structured in phases with clear deliverables at each gate, so you always know what you have paid for and what comes next.

  1. Scope

    We agree what materials and units the study needs, and whether you want an introduction to a partner.

  2. Prepare

    Surrogate solutions are made, and containers are filled and, if needed, assembled, labeled or kitted.

  3. Connect

    If you need a study run, we introduce a partner on retainer. That partner contracts directly with you.

  4. Deliver

    Materials and units ship to you or to the partner, ready for the study.

  5. Test

    If useful alongside the study, device characteristics can be measured in the lab at Kiln. That lab testing is not a human factors study.

Deliverables

Deliverables are defined in the proposal before work starts. A typical engagement includes the following.

Surrogate solutionsMatched to the properties you define, with the measurements
Filled and assembled unitsTest units prepared for the study, not for human use
Partner introductionAn introduction to a human factors partner on retainer, if you want one
Lab test dataIf device characterization at Kiln is part of the work

Related services

Filling and surrogate solutionsSmall-scale filling at nominal and process extremes, with matched surrogates
Device assembly and packagingDevelopment builds with force and torque monitored on every unit
ISO 11608 testingDesign verification for pens, autoinjectors and other needle-based injection systems
Supplier survey and selectionSide-by-side comparison of container, device, CMO and CPO options
Devices we supportPrefilled syringes, cartridges, autoinjectors, pens, wearables and more

Questions we hear often

If yours isn't here, it's a good thing to bring to a consultation.

Do you run human factors studies?

No. Kiln does not conduct formative or summative human factors studies. We supply materials and surrogates for those studies, and have partners on retainer who run the studies and contract directly with you.

What materials can you supply?

Surrogate solutions, filled syringes, cartridges or vials, and assembled devices, labeled, packed out or kitted when the study needs it. Filled units are for testing and development only, not for human use.

How do the partners work with us?

The partners are on retainer with Kiln. If you need a study run, we introduce you, and the partner contracts directly with you for the study work.

Can the same units also be tested in the lab?

Yes. Units prepared for a human factors study can also go into functional or ISO 11608 testing at Kiln. That laboratory testing is separate from the human factors study.

Need materials for a human factors study?

Tell us about the product and what the study needs. We'll set up a call to talk through materials, timing and, if you want, a partner introduction.

Prefer email? Write to info@kiln-lab.com or call +1 (866) 350-8240.